OPTOLAMP WATERPROOF CONNECTOR - IP68
-Excellent quality.
-The set is supplied with the wires in the same colors as the Optolamp® signal line.
-Faster and simpler maintenance on the top of the mast. Quick connect-disconnect.
-Can also be used in other areas of the boat's electrical system
Optolamp® signaling products do NOT produce interference (RFI-EMI) on boat equipment.
Optolamp and the Ecology:
Some materials used in different manufacture parts of our products are originally in the market, our ecological policy is to avoid greater consumption of raw material, energy and matrix tools.
Use: Tunnels; Floating Photovoltaic System; Petroleum Platforms; Ports Docks; Cranes; Piers; Airports and all industries.
4 in 1: Steady Light; Strobe Light; Fast Strobe Light; Photo-sensor built-in. If necessary, ask about models with only strobe light function.
OPTOLAMP® signalization: electronics assembly similar to that usedin the Military and Aerospace area: absolutely reliable.
Description:
Consumes 10 times less energy.
Ultra Low Consumption UBC®: It can work up to 9 to 20 nights with a 12V/75A battery without recharge it.
Total resistance against mechanic stress.
Easy installation.
Warranty HE: 2 years.
Pat. Dep.
Specifications:
Weight: 300gr.
Height: 200 mm.
Diameter: 100 mm.
Structure: Cast aluminum alloy and protective grid with reinforcement.
Finish: Epoxy painting - gray color.
Installation base: ¾” BSP or NPT threaded inlet.
Lens: Glass resistant to thermal shocks threaded on the body.
Power Source: 110V/220V. Option: 9,6V to 14,4V or 24V.
Consumption UBC®: 0,156A to 0,375A
Horizontal Range: 6 Km to 8 Km.
Photo-Sensor: option if necessary.
Light source: LED High Intensity.
Light intensity: 2100000mcd (models with higher light intensities available).
Light color: white. Option: red; amber; green and blue.
LED life: minimum 50000 h.
OPTOLAMP® signalization products do not cause RFI-EMI interference on the boat equipment.
Optolamp and the Ecology:
Some materials used in different manufacture parts of our products are originally in the market, our ecological policy is to avoid greater consumption of raw material, energy and matrix tools.
Use: Floating Photovoltaic System; Petroleum Platforms; Ports Docks; Piers; Towers; Antenna; Airports and all industries.
4 in 1: Steady Light; Strobe Light; Fast Strobe Light; Photo-sensor built-in.
OPTOLAMP® signalization: electronics assembly similar to that usedin the Military and Aerospace area: absolutely reliable.
Description:
Consumes 10 times less energy.
Ultra Low Consumption UBC®
Total resistance against mechanic stress.
Easy installation.
Warranty HE: 2 years.
Pat. Dep.
Specifications:
Weight: 280gr.
Height: 114 mm.
Diameter: 82 mm.
Installation base: anodized aluminum: 60 mm x 32 mm.
Power Source: 10,6V to 14,4V.
Option -not included: 24V; 110V and 220V.
Consumption UBC®: A model: 0,180. A; B and C models: 0,375A.
Photo-Sensor: built-in.
Light source: LED.
Light intensity: A model= 10cd; B / E models= 32cd and C model= 40cd.
Color light option according to the Norm: A/B/E models: Red or White; C model: Yellow and blue.
LED life: minimum 50000 h.
Fully Life Sealed: Waterproof, non corrosive, non magnetic.
Grade: IP66. Option: models IP67.
OPTOLAMP® signalization products do not cause RFI-EMI interference on the boat equipment.
Optolamp and the Ecology:
Some materials used in different manufacture parts of our products are originally in the market, our ecological policy is to avoid greater consumption of raw material, energy and matrix tools.
Use: Tunnels; Floating Photovoltaic System; Petroleum Platforms; Ports Docks; Cranes; Piers; Airports and all industries.4 in 1: Steady Light; Strobe Light; Fast Strobe Light; Photo-sensor built-in and Bi-dimensional signalization: vertical emission up to 7 Km.
OPTOLAMP® signalization: electronics assembly similar to that usedin the Military and Aerospace area: absolutely reliable.
Description:
Consumes 10 times less energy.
Ultra Low Consumption UBC®: It can work up to 9 to 20 nights with a 12V/75A battery with out recharge it.
Total resistance against mechanic stress.
Easy installation.
Warranty HE: 2 years.
Pat. Dep.
Specifications:
Weight: 250gr.
Height: 128 mm.
Lamp body diameter: 60 mm.
Installation base diameter: 80mm.
Power Source: 9,6V to 14,4V.
Option -not included: 24V; 110V and 220V.
Consumption UBC®: 0,312A to 0,510A
Horizontal Range: 7 Km to 9.5 Km.
Vertical Range: up to 7 Km.
Photo-Sensor built-in (option).
Light source: LED.
Light Hight Intensity: in Strobe Light function 3200000mcd.
Light color option: white; red; green; amber and blue.
LED life: minimum 50000 h.
Fully Life Sealed: waterproof, non-corrosive, non-magnetic
OPTOLAMP® signalization products do not cause RFI-EMI interference on the boat equipment.
Optolamp and the Ecology:
Some materials used in different manufacture parts of our products are originally in the market, our ecological policy is to avoid greater consumption of raw material, energy and matrix tools.
Angra AC: ceiling light; reading; work compartments; etc.
Due to its Ultra Low Power Consumption (UBC®), the Angra AC model requires very little power to operate. Note: Consult about the Angra model to be powered by a 12/24V battery.
CHARACTERISTICS:
Voltage: dual voltage 100-240V.
Luminous flux: 1080lm.
Light: 3500/4000K.
Opening angle: 120°
Frequency: 50/60Hz.
Lifespan: 30,000 hours.
Protection: Indoor use.
Operating temperature: -15°C to 40°C
By Optolamp®
OPTOLAMP® signalization products do not cause RFI-EMI interference on the others equipment.
Optolamp and the Ecology:
Some materials used in different manufacture parts of our products are originally in the market, our ecological policy is to avoid greater consumption of raw material, energy and matrix tools.
OPTOLAMP WATERPROOF CONNECTOR - IP67
-Excellent quality.
-The set is supplied with the wires in the same colors as the Optolamp® signal line.
-Faster and simpler maintenance on the top of the mast. Quick connect-disconnect.
Other Optolamp® accessories (not included):
-Optolamp® control switch with box for boat panel: SW-310.
-Optolamp switch: SW3 used in the Amazônia Mirim model: SW version.
Optolamp® signaling products do NOT produce interference (RFI-EMI) on boat equipment.
Optolamp and the Ecology:
Some materials used in different manufacture parts of our products are originally in the market, our ecological policy is to avoid greater consumption of raw material, energy and matrix tools.
NAVIGATION LIGHT, ANCHOR LIGHT AND ON-OFF FUNCTIONS IN ONE CONTROL SWITCH.
Marine Toggle Switch Protection for Dirt-Water
Specifications:
• Wires out-put: REAR or LATERAL.
• Wires conection: AMAZÔNIA COLOR CODE.
• 3 Positions Switch: NAVIGATION-OFF-ANCHOR.
• Internal use.
• Current: 3A.
Because of its Ultra Low Consumption and total resistance against mechanic stress, OPTOLAMP was chosen for the races: "VANDÈE
GLOBE"; "LA ROUTE DU RHUM"; "MINITRANSAT"; "TRANSAT JAQUES VABRE"; "GLOBAL CHALLENGE" – VDH "ADRIEN" Solo around
the world record against winds and currents; Maude Fontenoy: North Atlantic row crossing; TRANSQUADRA, Schurmann Orient Expedition;
Voice of The Ocean expedition, etc.
Schurmann Orient Expedition; Voice of The Ocean expedition, etc.
Plus Version: NEW Installation system, Double Waterproof Seal and IP68 Connector Option
4 IN 1: Tri-color Navigation light, Anchor light, Switches on-off automatically: at dawn at night and during storms or fog and Bi-Dimensional VLE System.
OPTOLAMP New line
The assembly of the electronics is similar to that used in the Military and Aerospace area: it is absolutely reliable.
GLOBAL WARRANTY: 3 YEARS
NEW "AMAZÔNIA Eco Plus"
VLE System now with two functions: 1-High Light Emission up to 4.4NM for Aerial Rescue. 2-In the Navigation Light function, the VLE System will adjust its intensity accordingly to illuminate only the Wind indicator on the top.
LS: New high sensitivity light sensor.
Sector 4: The optical system upgrade for the traditional bi-dimensional OPTOLAMP® lens, enables precise focusing.
OPTION: Amazônia 5 Aluminum: to replace previous Optolamp models. Simple installation without modifications (aluminum base).
RFI/EMI: absolutely FREE.
TDPS Pro System - safe signalization: even if there is a defect in the system, the safety of the boat will always be maintained (it TDPS System acts as a second lamp in the event of a system failure).
VLE and TDPS Pro Systems are an exclusive Optolamp characteristic.
Ultra Low Consumtion – UBC® - First Integrated LED Light in the market.
ABSOLUTE SAFE SIGNALIZATION: MAXIMUM LIGHT INTENSITY WITH DISCHARGED BATTERIES. DRAWS 18 TIMES LESS ENERGY.
Amazônia model Versions:
Amazônia Eco Plus "Classic" Version: 3 wires are needed for: Tricolor and Anchor Light. Standard Installation with the original boat panel switches.
Amazônia Eco PLus "SW" Version: Only 2 wires for: Tricolor and Anchor Light. This version must use a mode selector: 3 positions switch ON-OFF-ON - You can use the Optolamp SW3 Accessory with wires and toggle protection (Not provided), or any 3 positions conventional switch: ON-OFF-ON..
Description:
Simple Installation: Base in Delrin block.
Waterproof IP 67 or IP68, connector (Optional Optolamp® Accessory: C3 or C4 -Not provided).
OPTION: Amazônia Eco Aluminum: to replace previous Optolamp models. Simple installation without modifications (aluminum base).
It can work up to 40 nights with a 12V/75A battery without recharge it.
Consumes 18 times less energy.
Show the Top Wind Indicator.
Total resistance against mechanic stress.
Warranty HE: 3 years.
Patented.
Specifications:
Weight: 225 gr
Height: 125 mm.
Diameter: 60 mm.
Base: Delrin block, very fast installation.
Power source: 10,6V to 14,4V.
Option 24V: V1830 Optolamp Converter -Not provided.
Consumption UBC®: 0,126A to 0,155A.
Horizontal range: minimum 2,2 NM.
In accordance with the COLREG Norms.
Vertical range VLE system: up to 4,4 NM.
Switches on-off automatically (Anchor Light): at dawn at night and during storms or fog.
LED life: minimum 50000 hs.
Accessories:
-Optolamp® Box Switch SW-310 -Not provided (for SW version).
-Optolamp® SW3 Accessory: for Amazônia Eco SW version -Not provided.
-Waterproof (IP 67 or IP68), connector C3 or C4 Optolamp® Accessory -Not provided.
-New Electronic 24V Converter V1830 -Not provided.
OPTOLAMP® signalization products do not cause RFI-EMI interference on the boat equipment.
Optolamp and the Ecology:
Some materials used in different manufacture parts of our products are originally in the market, our ecological policy is to avoid greater consumption of raw material, energy and matrix tools.
DESCRIPTION:
SURFACE MOUNT MARINE LED LIGHT “Fiji Aluminum 2 in 1”.
Choose your preference at the time of installation: square or round.
Maximum light intensity with discharged batteries: absolute safe illumination in all conditions.
Eco Led Lamp® with Ultra Low Consumption - UBC®: it can work 31 nights with a 12V/75A battery (62 nights on 24V/75A), without recharge it.
- Safe illumination from 10V to 30V.
- The cabin always illuminated in navigation at night.
- Keeps your cabin cool, cold–lamp.
- Total resistance to mechanic stress.
- Warranty HE: 2 years.
SPECIFICATIONS:
Weight: 76gr.
- Aluminum
- Dimensions: Square 70x70mm / Round 52mm.
- Hole diameter: Square 63 mm / Round 46mm.
- Deep: 20 mm.
- Power Source: 10V to 30V.
- Consumption UBC®: 12V= 0,200A (200mA); 24V= 0,100A (100mA).
- Light Source: Electronic: 12 LED - 450lm.
- Angle: 140°.
- Options Temp. white Light: 4000K.
- LED life: minimum 50000 hs.
DESCRIPTION: (without stock) Bi-Color Led Light for Table Chart and reading Automatic. Automatically switches to white or red light. To use in Bridge (red light: navigation at night), table charts, circulation light, etc. Maximum light intensity with discharged batteries: absolute safe illumination. Ultra Low Consumption - UBC®: it can work 69 or 156 nights with a 12V/75A battery without recharge it (104 or 156 nights in 24V).
- Safe illumination from 10V to 30V.
- The cabin always illuminated in navigation at night.
- Keeps your cabin cool, cold–lamp.
- Total resistance to mechanic stress.
- Warranty HE: 2 years.
SPECIFICATIONS:
Black aluminum.
- Weight: 270 gr.
- Height: 250 mm.
- Color Light: Automatically switches to white or red light.
- Power Source: 10V to 30V.
- Power Consumtion UBC®: 12V= 0,090/0,040A (90/40mA); 24V= 0,060/0,040A (60/40mA).
- Light Source: Electronic, Led 140lm or 280lm.
- On-Off switch.
- LED life: minimum 50000hs.
DESCRIPTION:
SURFACE MOUNT MARINE LED LIGHT “Bora-Bora” Generation II (Replace halogen 18 to 22W).
Maximum light intensity with discharged batteries: absolute safe illumination in all conditions.
Eco Led Lamp® with Ultra Low Consumption - UBC®: it can work 22 nights with a 12V/75A battery (44 nights on 24V/75A), without recharge it.
- Safe illumination from 10V to 30V.
- The cabin always illuminated in navigation at night.
- Keeps your cabin cool, cold–lamp.
- Total resistance to mechanic stress.
- Warranty HE: 2 years.
SPECIFICATIONS:
- Weight: 130 gr.
- Anodized Aluminum.
- Diameter: 85mm.
- Hole diameter: 70mm.
- Deep: 25mm.
- Power Source: 10V to 30V.
- Consumption UBC®: 12V= 0,200A (200mA); 24V= 0,100A (100mA).
- Light Source: Electronic: LED - 450lm.
- Angle: 140°.
- Options Temp. white Light: 3500K or 5500K.
- LED life: minimum 50000 hs.
DESCRIPTION:
SURFACE MOUNT MARINE LED LIGHT LX Generation IV.
Maximum light intensity with discharged batteries: absolute safe illumination in all conditions.
Eco Led Lamp® with Ultra Low Consumption - UBC®: it can work 31 nights with a 12V/75A battery (62 nights on 24V/75A), without recharge it.
- Safe illumination from 10V to 30V.
- The cabin always illuminated in navigation at night.
- Keeps your cabin cool, cold–lamp.
- Total resistance to mechanic stress.
- Warranty HE: 2 years.
- Pat. Dep.
SPECIFICATIONS:
- Anodized Aluminum.
- Weight: 60 gr.
- Hole diameter: 53 mm.
- Diameter: 65 mm.
- Deep: 20 mm.
- Power Source: 10V to 30V.
- Consumption UBC®: 12V= 0,180A (180mA); 24V= 0,090A (90mA).
- Light Source: Electronic: LED - 360lm.
- Angle: 140°.
- Options Temp. white Light: 4000K.
- LED life: minimum 50000 hs.
DESCRIPTION:
SURFACE MOUNT MARINE LED LIGHT “Fiji” Generation II - BRIGHT
Maximum light intensity with discharged batteries: absolute safe illumination in all conditions.
Eco Led Lamp® with Ultra Low Consumption - UBC®: it can work 31 nights with a 12V/75A battery (62 nights on 24V/75A), without recharge it.
- Safe illumination from 10V to 30V.
- The cabin always illuminated in navigation at night.
- Keeps your cabin cool, cold–lamp.
- Total resistance to mechanic stress.
- Warranty HE: 2 years.
SPECIFICATIONS:
Weight: 142 gr.
- Stainless Steel 316L - BRIGHT
- Dimensions: diameter 75mm.
- Hole diameter: 63 mm.
- Deep: 24 mm.
- Power Source: 10V to 30V.
- Consumption UBC®: 12V= 0,200A (200mA); 24V= 0,100A (100mA).
- Light Source: Electronic: 12 LED - 450lm.
- Angle: 140°.
- Options Temp. white Light: 4000K.
- LED life: minimum 50000 hs.
DESCRIPTION:
SURFACE MOUNT MARINE LED LIGHT “Fiji” Generation II - MATTE.
Maximum light intensity with discharged batteries: absolute safe illumination in all conditions.
Eco Led Lamp® with Ultra Low Consumption - UBC®: it can work 31 nights with a 12V/75A battery (62 nights on 24V/75A), without recharge it.
- Safe illumination from 10V to 30V.
- The cabin always illuminated in navigation at night.
- Keeps your cabin cool, cold–lamp.
- Total resistance to mechanic stress.
- Warranty HE: 2 years.
- Pat. Dep.
SPECIFICATIONS:
- Weight: 142 gr.
- Stainless Steel 316L - MATTE.
- Hole diameter: 63 mm.
- Dimensions: 75 x 75mm.
- Deep: 24 mm.
- Power Source: 10V to 30V.
- Consumption UBC®: 12V= 0,200A (200mA); 24V= 0,100A (100mA).
- Light Source: Electronic: 12 LED - 450lm.
- Angle: 140°.
- Options Temp. white Light: 4000K.
- LED life: minimum 50000 hs.
For decoration, closet, Roof, etc.
Description:
The area always illuminated with minimum consumption.
Absolute safe illumination. Maximum light intensity.
Keeps the area cool, cold–lamp.
Total resistance to mechanic stress.
Ultra Low Consumption-UBC®.
Warranty: HE.
Pat. Dep.
Specifications:
White Aluminum.
Weight: 90 gr.
Hole diameter: 75 mm.
Diameter: 85 mm.
Deep: 23 mm.
Power Source: 110V-220V.
Consumption UBC®: 2W to 3,7W.
Light Source: electronic, LED UBC® Optolamp®.
Light Color: white 3500K or 5500K.
Light color options red, blue, green and amber.
LED life: minimum 50000 hs.
To insert in steps, walls, circulation areas, etc. Spot without temperature, cold work.
Description:
Maximum light intensity in all energy conditions: absolute safe illumination.
Ultra Low Consumption - UBC®: it can work minimum 208000 nights.
The area always illuminated.
Keeps your home cool, cold–lamp.
Total resistance to mechanic stress.
Warranty HE: 2 years.
Pat. Dep.
Specifications:
Anodized Aluminum.
Weight: 50 gr.
Hole diameter: 52 mm.
Dimension: 65 x 65 mm.
Deep: 23 mm.
Power Source: 12V and 110V-220V.
Consumption UBC®: 0,020A (20mA).
Light Source: electronic, LED UBC® Optolamp®.
Light Color: white, blue, red, green or amber.
LED life: minimum 50000 hs.
REFLECTOR with LED REF-12 Mod. Taschibra®
Provided and Controlled by OPTOLAMP®
For the exterior or interior areas: security, garages, gardens, factories, exterior publicities, etc..
Description:
The area always illuminated with minimum consumption.
Absolute safe illumination. Maximum light intensity.
High intensity illumination. Excellent for video.
Keeps the area cool, cold–lamp.
Total resistance to mechanic stress IP65.
Ultra Low Consumption-UBC®.
Warranty HE: 6 months.
Specifications:
Aluminum.
Weight: 220gr.
Dimensions: Long 127mm. Height 112mm. Deep 24mm.
Work position: +/- 90º to the horizontal reference.
Power Source: 100V to 240V.
Consumption UBC®.
Option: Photo-sensor (not included).
Light Source Electronic: 48 Super LED.
Light temperature: 6500K.
Light Flux: 4000lm.
Light Efficiency: 80lm/W.
Maximum Lighting Power: 50W.
LED average life: 20000 hs.
Taschibra® is trade mark from Taschibra Enterprise from Indaial/SC.
By Optolamp®
Optolamp and the Ecology:
Some materials used in different manufacture parts of our products are originally in the market, our ecological policy is to avoid greater consumption of raw material, energy and matrix tools.
To read, decoration, closet; etc..
Description:
Ultra Low Consumption-UBC®: it can work minimum 4100 nights.
The home always illuminated with minimum consumption.
Maximum light intensity: absolute safe illumination.
Keeps your home cool, cold–lamp.
Total resistance to mechanic stress.
Warranty HE: 2 years.
Pat. Dep.
Specifications:
Weight: 200gr.
Height: 100mm.
Ultra Low Consumption-UBC®: 220V = 3,7W - 110V = 2W.
Light Selector switch and On-Off switch.
Light Source: electronic stabilized.
Color Light: white, red, blue, green or amber.
Option: white light temperature, 3500K or 5500K. Power Source: 110V - 220V.
LED life: minimum 50000hs.
To read, decoration, closet, etc..
Description:
Ultra Low Consumption-UBC®: it can work minimum 4100 nights.
The home always illuminated with minimum consumption.
Maximum light intensity: absolute safe illumination.
Keeps your home cool, cold–lamp.
Total resistance to mechanic stress.
Warranty HE: 2 years.
Pat. Dep.
Specifications:
Weight: 140gr.
Height: 120mm.
Ultra Low Consumption-UBC®: 220V = 3,7W - 110V = 2W.
Light Selector switch and On-Off switch.
Light Source: electronic stabilized.
Color Light: white, red, blue, green or amber.
Option: white light temperature, 3500K or 5500K. Power Source: 110V - 220V.
LED life: minimum 50000hs.
To read, for computer, for precision work, machines, etc..
Description:
Ultra Low Consumption-UBC®: it can work 4100 nights.
The home always illuminated with minimum consumption.
Maximum light intensity: absolute safe illumination.
Keeps your home cool, cold–lamp.
Total resistance to mechanic stress.
Warranty HE: 2 years.
Pat. Dep.
Specifications:
Black Aluminum.
Weight: 270 gr.
Height: 250 mm - Flexible.
Color Light: white, red or amber.
Power Source: 85V to 265V.
Ultra Low Consumption-UBC®: 220V= 3,7W - 110V= 2W.
Light Selector switch and On-Off switch.
Light Source: electronic stabilized.
Light Colors: white; amber and red.
LED life: minimum 50000hs.
Ultra Low Consumption-UBC®: it can work 4100 nights. The home always illuminated with minimum consumption.
Description:
Maximum light intensity: absolute safe illumination.
Keeps your home cool, cold–lamp.
Total resistance to mechanic stress.
Warranty HE: 2 years.
Pat. Dep.
Specifications:
Anodized Aluminum, Chrome or Bronze.
Weight: 50 gr.
Diameter: 65 mm.
Deep: 23 mm.
Power Source: 110V or 220V.
Consumption UBC® 220V=18W - 110V=16W.
Light Source: Electronic Super Led.
LED life: minimum 50000 hs.
- Description:
- For Spreaders, Cockpit, Security light, etc.
- Ultra Baixo Consumo – UBC®
- Warranty HE: 2 years.
- Specifications:
- Weight: 135gr.
- Diameter: 60mm.
- Height: 76mm.
- Power Source: 10,0V to 30,0V.
- Consumption UBC®: 12V= 0,200A (200mA); 24V= 0,100A (100mA).
- Light Source: LED - 450lm.
- Angle: 140°.
- Light color option: White 4000K.
Optolamp and the Ecology:
Some materials used in different manufacture parts of our products are originally in the market, our ecological policy is to avoid greater consumption of raw material, energy and matrix tools.
TO USE IN ALL OPTOLAMP MODELS
DESCRIPTION:
2 POSITIONS SWITCH: ON-OFF.
COLOURS: BLACK or WHITE.
SPECIFICATIONS:
TERMINALS: SOLD AND ISOLATE WIRES.
CURRENT: 10A.
To Replace the old bulbs systems: Spreader lights, interior lights, cockpit light, boom, etc.
Maximum light intensity with discharged batteries: absolute safe illumination.
Ultra Low Consumption - UBC®: it can work 62 nights with a 12V/75A battery without recharge it.
DESCRIPTION:
Safe illumination from 10,7V to 14,4V (24V Option).
RF (Radio frequency) interference free.
The cabin always illuminated in navigation at night.
Keeps your cabin cool, cold–lamp.
Total resistance to mechanic stress.
Warranty HE: 2 years.
SPECIFICATIONS:
Weight: 45gr.
Height: 23 mm.
Diameter: 62mm.
Power Source: 10,7V to 14,4V (24V Option).
Consumption UBC®: 20 led: 0,200A (200mA).
Light Source: Electronic: Led - 600000mcd.
Angle: 50°.
Light colors: white, blue, red, green or amber.
LED life: minimum 50000 hs.
10 Led: with lens.
To Replace the old bulbs systems: Spreader lights, interior lights, cockpit light, boom, etc.
Maximum light intensity with discharged batteries: absolute safe illumination.
Ultra Low Consumption - UBC®: it can work 62 nights with a 12V/75A battery without recharge it.
DESCRIPTION:
Safe illumination from 10,7V to 14,4V (24V Option).
RF (Radio frequency) interference free.
The cabin always illuminated in navigation at night.
Keeps your cabin cool, cold–lamp.
Total resistance to mechanic stress.
Warranty HE: 2 years.
SPECIFICATIONS:
Weight: 35gr.
Height: 23 mm.
Diameter: 42 mm.
Power Source: 10,7V to 14,4V (24V Option).
Consumption UBC®: 10 led: 0,100A (100mA).
Consumption UBC®: 20 led: 0,100A (100mA).
Light Source: Electronic: Led - 300000 mcd.
Angle: 50°.
Light colors: white, blue, red, green or amber.
LED life: minimum 50000 hs.
10 Led: with lens.
For general illumination, working area, kitchen, engine room, etc..
Maximum light intensity with discharged batteries: absolute safe illumination.
Eco Led Lamp® with Ultra Low Consumption - UBC® it can work: Mod. 1214 > 27 nights and, Mod. 1030 > 18 nights (with a 12V/75A battery without recharge it).
DESCRIPTION:
Safe illumination: Mod. 1214, from 10,0V to 14,4V // Mod. 1030, from 10,0V to 30V .
RF (Radio frequency) interference free.
Keeps your cabin cool, cold–lamp.
Total resistance to mechanic stress.
Warranty HE: 2 years.
SPECIFICATIONS:
Weight: Mod. 1214, 215gr. // Mod. 1030, 190gr.
Dimensions: 79 x 42 x 222mm.
Power Source:
"Angra 1030": 10V to 30V.
"Angra 1214": 10,5V a 14,4V.
Consumption UBC®:
"Angra 1214": 0,230A.
"Angra 1030": 0,340A.
Light Source: High Intensity LED.
Luminous Flux:
"Angra 1214": 1000lm.
"Angra 1030": 720lm.
Angle: 140º.
Temperature light: 4000K.
LED life: minimum 50000 hs.
To insert in steps, inside or in the cockpit area, screens, cabinets, engine room, circulation areas, etc. Works with no temperature, cold spot.
Maximum light intensity with discharged batteries: absolute safe illumination.
Eco Led Lamp® with Ultra Low Consumption - UBC®: it can work 312 nights with a 12V/75A battery without recharge it.
DESCRIPTION:
Safe illumination from 10,5V to 14,4V.
RF (Radio frequency) interference free.
The cabin always illuminated in navigation at night.
Keeps your cabin cool, cold–lamp.
Total resistance to mechanic stress.
Internal use.
Warranty HE: 2 years.
SPECIFICATIONS:
Stainless Steel 316L.
Weight: 10 gr.
Hole diameter: 12 mm.
Dimension: 20 x 20 mm.
Deep: 21 mm.
Power Source: 10,5V to 14,4V (24V Option).
Option: 24V.
Consumption UBC®: 0,020A (20mA).
Light Source: Electronic - Led.
Three light intensity.
LED life: minimum 50000 hs.
Light Color: white, blue, red, green or amber.
To insert in steps, inside or in the cockpit area, screens, cabinets, engine room, circulation areas, etc. Works with no temperature, cold spot.
Maximum light intensity with discharged batteries: absolute safe illumination.
Eco Led Lamp® with Ultra Low Consumption - UBC®: it can work 312 nights with a 12V/75A battery without recharge it.
DESCRIPTION:
Safe illumination from 10,5V to 14,4V.
RF (Radio frequency) interference free.
The cabin always illuminated in navigation at night.
Keeps your cabin cool, cold–lamp.
Total resistance to mechanic stress.
Warranty HE: 2 years.
Pat. Dep.
SPECIFICATIONS:
Weight: 80 gr.
Stainless Steel 316L.
Hole diameter: 56 mm.
Dimension: 62 x 62 mm.
Deep: 21 mm.
Power Source: 10,5V to 14,4V (24V Option).
Option: 24V.
Consumption UBC®: 0,020A (20mA).
Light Source: Electronic - Led.
LED life: minimum 50000 hs.
Light Color: white, blue, red, green or amber.
To insert in steps, inside or in the cockpit area, screens, cabinets, engine room, circulation areas, etc. Works with no temperature, cold spot.
Maximum light intensity with discharged batteries: absolute safe illumination.
Eco Led Lamp® with Ultra Low Consumption - UBC®: it can work 312 nights with a 12V/75A battery, without recharge it.
DESCRIPTION:
Safe illumination from 10,5V to 14,4V.
RF (Radio frequency) interference free.
The cabin always illuminated in navigation at night.
Keeps your cabin cool, cold–lamp.
Total resistance to mechanic stress.
Warranty HE: 2 years.
SPECIFICATIONS:
Weight: 50 gr.
Anodized Aluminum.
Hole diameter: 53 mm.
Diameter: 65 mm.
Deep: 20 mm.
Power Source: 10,5V to 14,4V (24V Option).
Option: 24V.
Consumption UBC®: 0,020A (20mA).
Light Source: Electronic - Led.
LED life: minimum 50000 hs.
Light Color: white, blue, red, green or amber.
DESCRIPTION: Bi-Color Spot Led and reading Light - Automatic. Automatically switches to white or red light. To use on the boat bridge (navigation at night: red light), table charts, circulation light, etc. Maximum light intensity with discharged batteries: absolute safe illumination.
Eco Led Lamp® with Ultra Low Consumption - UBC®: it can work 69 or 156 nights with a 12V/75A battery without recharge it (104 or 156 nights in 24V).
- Safe illumination from 10V to 30V.
- The cabin always illuminated in navigation at night.
- Keeps your cabin cool, cold–lamp.
- Total resistance to mechanic stress.
- Warranty HE: 2 years.
SPECIFICATIONS:
Stainless Steel 316L or MATTE (or Anodized Aluminum).
- Dimension: 62 x 62 mm (or Diameter: 65 mm).
- Deep: 21 mm.
- Color Light: Automatically switches to white or red light.
- Power Source: 10V to 30V.
- Power Consumtion UBC®: 12V= 0,090/0,040A (90/40mA); 24V= 0,060/0,040A (60/40mA).
- Light Source: Electronic, Led 140lm or 280lm.
- LED life: minimum 50000hs.
Maximum light intensity with discharged batteries: absolute safe illumination.
Eco Led Lamp® with Ultra Low Consumption - UBC®: it can work 19 nights with a 12V/75A battery without recharge it.
DESCRIPTION:
RF (Radio frequency) interference free.
Safe illumination from 11,8V to 14,4V.
The cabin always illuminated in navigation at night.
Keeps your cabin cool, cold–lamp.
Total resistance to mechanic stress.
Warranty HE: 2 years.
SPECIFICATIONS:
Anodized Aluminum.
Weight: 130 gr.
Hole diameter: 66 mm.
Dimensions: 78 mm.
Deep: 28 mm.
Power Source: 11,8V to 14,4V.
Consumption UBC®: 0,330A (330mA).
Light Source: Electronic: LED - 250 to 300lm - 1 meter.
Options Temp. white light: 5500K - Warm white 3500K.
Angle: 140°.
LED life: minimum 50000 h.
Maximum light intensity with discharged batteries: absolute safe illumination.
Eco Led Lamp® with Ultra Low Consumption - UBC®: it can work 62 nights with a 12V/75A battery, without recharge it.
DESCRIPTION:
• Safe illumination from 10,7V to 14,4V.
• RF (Radio frequency) interference free.
• The cabin always illuminated in navigation at night.
• Keeps your cabin cool, cold–lamp.
• Total resistance to mechanic stress.
• Warranty HE: 2 years - Pat.Dep.
SPECIFICATIONS:
• Anodized Aluminum.
• Weight: 50 gr.
• Hole diameter: 53 mm.
• Diameter: 65 mm.
• Deep: 20 mm.
• Power Source: 10,7V to 14,4V (24V Option).
• Consumption UBC®: 0,100A (100mA).
• Light Source: Electronic, Led 280lm.
• Angle: 50°.
• LED life: minimum 50000 hs.
Description:
TO USE IN ALL OPTOLAMP MODELS.
Specifications:
• 3 Positions switch: ON-OFF-ON.
• UV Protection: BLACK or WHITE.
• Terminals: SIX off 2,8 X 0,5 MM.
• Current: 15A.
Description:
NAVIGATION LIGHT, ANCHOR LIGHT AND ON-OFF FUNCTIONS IN ONE CONTROL SWITCH.
Marine Toggle Switch Protection for Dirt-Water
Specifications:
• Wires out-put: REAR or LATERAL.
• Wires conection: AMAZÔNIA COLOR CODE.
• 3 Positions Switch: NAVIGATION-OFF-ANCHOR.
• Internal use.
• Current: 3A.
Because of its Ultra Low Consumption and total resistance against mechanic stress, OPTOLAMP was chosen for the races: "VANDÈE
GLOBE"; "LA ROUTE DU RHUM"; "MINITRANSAT"; "TRANSAT JAQUES VABRE"; "GLOBAL CHALLENGE" – VDH "ADRIEN" Solo around
the world record against winds and currents; Maude Fontenoy: North Atlantic row crossing; TRANSQUADRA, Schurmann Orient Expedition;
Voice of The Ocean expedition, etc.
4 IN 1 LED LIGHT: STEADY LIGHT, STROBE, FAST STROBE LIGHT and LIGHT SENSOR.
Switches on-off automatically (electronic sensor):at dawn, at night and during storms or fog.
ABSOLUTE SAFE SIGNALIZATION: MAXIMUM LIGHT INTENSITY WITH DISCHARGED RESERVE BATTERIES.
OPTOLAMP New line
The assembly of the electronics is similar to that used in the Military and Aerospace area: it is absolutely reliable.
GLOBAL WARRANTY: 3 YEARS
Description:
Consumes 12 times less energy.
Ultra Low Consumption: It can work 40 nights with a 12V/75A battery without recharge it.
Total resistance against mechanic stress.
Easy installation.
Warranty HE: 2 years.
Pat. Dep.
Specifications: Photo-sensor built-in.
Weight: 216 gr.
Height: 114 mm.
Diameter: 82 mm.
Installation base: anodized aluminum (60mm x 38mm).
Power Source: 10,6V to 14,4V. (24V; 110V and 220V with optional converter).
Consumption UBC®: 0,200A to 0,310A.
Horizontal Range: minimum 2,4 NM (up to 3,5/4NM).
Light intensity: 685000 mcd.
Flashes > Normal Strobe: 1 sec and Fast Strobe: 0,5 sec. (Other Strobe time can be customized at the factory).
Colors options: white; amber; red; green and blue.
Light source: Electronic LED.
LED life: minimum 50000 hours.
OPTOLAMP® signalization products do not cause RFI-EMI interference on the electronic equipment.
Optolamp and the Ecology:
Some materials used in different manufacture parts of our products are originally in the market, our ecological policy is to avoid greater consumption of raw material, energy and matrix tools.
The SYNCRO LED® Electronic System, allows the synchronism of 2 to 6 Super Strobes Light Optolamp® Sapphire II.
Description:
The electronic system Syncro Led® allows the synchronism of two, four or six Super Strobes LED Light Sapphire II. The result is a notable signalization effect in all weather conditions given more security. Recommendable for Pilot Boats; Survival Boats; Diver Boats; Motor Boats; Petroleum Platforms; etc..
Specifications:
Weight: 50 gr.
Dimensions: 75 mm x 63 mm x 40 mm.
Power Source: 11,8V to 14,4V.
Consumption: that depend of the strobe quantity.
Source for: 2 to 6 Super Strobe Light Sapphire.
Total resistance against mechanic stress
Fuse: 2 A.
Warranty: 2 years.
Use: Tunnels; Floating Photovoltaic System; Petroleum Platforms; Ports Docks; Cranes; Piers; Airports and all industries.
4 in 1: Steady Light; Strobe Light; Fast Strobe Light; Photo-sensor built-in and Bi-dimensional signalization: vertical emission up to 4,0 NM.
OPTOLAMP® signalization: electronics assembly similar to that usedin the Military and Aerospace area: absolutely reliable.
Description:
Consumes 10 times less energy.
Ultra Low Consumption UBC®: It can work up to 9 to 20 nights with a 12V/75A battery without recharge it.
Total resistance against mechanic stress.
Easy installation.
Warranty HE: 2 years.
Pat. Dep.
Specifications:
Weight: 289gr.
Height: 135 mm.
Diameter: 60 mm.
Installation base: anodized aluminum: 60mm x 80mm.
Power Source: 9,6V to 14,4V. Option: 24V; 110V and 220V.
Consumption UBC®: 0,156A to 0,375A
Horizontal Range: 6 Km to 8 Km.
Vertical Range: up to 7 Km.
Photo-Sensor built-in.
Light source: LED.
Light intensity: 1600000mcd.
Light color option: white; red; amber; green and blue.
LED life: minimum 50000 h.
OPTOLAMP® signalization products do not cause RFI-EMI interference on the boat equipment.
Optolamp and the Ecology:
Some materials used in different manufacture parts of our products are originally in the market, our ecological policy is to avoid greater consumption of raw material, energy and matrix tools.
SUPER ANCHOR STROBE LED LIGHT 4 in 1 NORMAL EMERGENCY STROBE; FAST EMERGENCY STROBE; ANCHOR LIGHT AND BI-DIMENSIONAL SIGNALIZATION: VLE System. Used on boats, piers, marinas signalization, etc.
VLE System -Vertical Light Emitting. Vertical Light Emission for Aerial Rescue up to 4.0NM.
ABSOLUTE SAFE SIGNALIZATION: MAXIMUM LIGHT INTENSITY WITH DISCHARGED BATTERIES.
OPTOLAMP New line
The assembly of the electronics is similar to that used in the Military and Aerospace area: it is absolutely reliable.
GLOBAL WARRANTY: 3 YEARS
Description:
Consumes 10 times less energy.
Ultra Low Consumption: It can work up to 9 to 20 nights with a 12V/75A battery without recharge it.
Total resistance against mechanic stress.
Show the Top Wind Indicator.
Base: Delrin block, very fast installation.
Warranty HE: 3 years.
Pat. Dep.
Specifications:
Weight: 224gr.
Height: 125 mm.
Diameter: 60 mm.
Color: Black or White.
Base: Delrin block, very fast installation.
Power Source: 9,6V to 14,4V.Option: 24V V1830 converter -Not provided.
Consumption UBC®: 0,156A to 0,375A
Horizontal Range -average intensity: 5,0 NM.
Vertical Range VLE System: up to 4,0 NM.
In accordance with the COLREG Norms.
Option: Photo-sensor model.
Light source: Electronic Led.
Light intensity: 2520000mcd.
Light color option: white; red; green and blue.
LED life: minimum 50000 h.
Accessory OPTOLAMP® SW-ST: mode selector (3 position switch for the boat panel -Not provided).
OPTOLAMP® signalization products do not cause RFI-EMI interference on the boat equipment.
Optolamp and the Ecology:
Some materials used in different manufacture parts of our products are originally in the market, our ecological policy is to avoid greater consumption of raw material, energy and matrix tools.
New Mega IV Series: High intensity light emission in Anchor and Strobe Light - 4 in 1 LIGHT for MOTOR BOATS: Anchor; Emergency Strobe; Fast Emergency Strobe and Bidimensional signalization: VLE System.
OPTOLAMP New line
The assembly of the electronics is similar to that used in the Military and Aerospace area: it is absolutely reliable.
GLOBAL WARRANTY: 3 YEARS
ABSOLUTE SAFE SIGNALIZATION: MAXIMUM LIGHT INTENSITY WITH DISCHARGED BATTERIES.
VLE System -Vertical Light Emitting. Vertical Light Emission for Aerial Rescue up to 4.3NM.
Description:
Consumes 12 times less energy.
Ultra Low Consumption: It can work 14 to 31 nights with a 12V/75A battery without recharge it.
Total resistance against mechanic stress.
Show the Top Wind Indicator.
Easy installation.
Warranty HE: 3 years.
Pat. Dep.
Specifications:
Weight: 283 gr.
Height: 135 mm.
Diameter: 60 mm.
Installation base: anodized aluminum (60mm x 80mm or 60mm x 30mm).
Power Source: 9,2V to 14,4V.
Option: 24V V1830 Optolamp Converter -Not provided.
Consumption UBC®: 0,100A to 0,210A
Horizontal Range: 2,2 to 3,5 NM.
Vertical Range VLE System: up to 4,3 NM.
Option: Photo-sensor model.
Light source: Electronic LED.
LED life: minimum 50000 hours.
Accessory OPTOLAMP® SW-ST: mode selector (3 position switch for the boat panel -Not provided).
OPTOLAMP® signalization products do not cause RFI-EMI interference on the boat equipment.
Optolamp and the Ecology:
Some materials used in different manufacture parts of our products are originally in the market, our ecological policy is to avoid greater consumption of raw material, energy and matrix tools.
Marine Led Light 4 in 1: ANCHOR, EMERGENCY STROBE, Switches on-off automatically AND BI-DIMENSIONAL SIGNALIZATION: VLE System.
VLE System -Vertical Light Emitting. Vertical Light Emission for Aerial Rescue up to 4.3NM.
ABSOLUTE SAFE SIGNALIZATION: MAXIMUM LIGHT INTENSITY WITH DISCHARGED BATTERIES.
OPTOLAMP New line
The assembly of the electronics is similar to that used in the Military and Aerospace area: it is absolutely reliable.
GLOBAL WARRANTY: 3 YEARS
Description:
Consumes 15 times less energy.
Ultra Low Consumption: It can work 50 nights with a 12V/75A battery without recharge it.
Total resistance against mechanic stress.
Show the Top Wind Indicator.
Installation: Base: Anodized Aluminum (marine grade).
Warranty HE: 3 years.
Pat. Dep.
Specifications:
Weight: 235 gr.
Height: 136 mm.
Diameter: 60 mm.
Base: Anodized Aluminum (marine grade).
Power Source: 9,2V to 14,4V.
Option: 24V - V1830 Optolamp Converter -Not provided.
Consumption UBC®: 0,126A to 0,145A.
Horizontal Range: minimum 2,0NM - Strobe light up to 3,5 NM.
Vertical Range VLE System: up to 4,3 NM.
In accordance with the COLREG Norms.
Photo-sensor built-in.
Switches on-off automatically: at dawn, at night and during storms or fog.
Light source: Electronic emission.
LED life: minimum 50000 hours.
Accessory OPTOLAMP® SW-ST: mode selector (3 position switch for the boat panel -Not provided).
OPTOLAMP® signalization products do not cause RFI-EMI interference on the boat equipment.
Optolamp and the Ecology:
Some materials used in different manufacture parts of our products are originally in the market, our ecological policy is to avoid greater consumption of raw material, energy and matrix tools.
Plus Version: NEW Installation system, Double Waterproof Seal and IP68 Connector Option
5 IN 1: Tri-color Navigation light, Anchor light, Emergency Strobe, Switches on-off automatically: at dawn at night and during storms or fog and Bi-Dimensional VLE System.
OPTOLAMP New line
The assembly of the electronics is similar to that used in the Military and Aerospace area: it is absolutely reliable.
GLOBAL WARRANTY: 3 YEARS
NEW "AMAZÔNIA 5 Plus"
VLE System now with two functions: 1-High Light Emission up to 4.4NM for Aerial Rescue. 2-In the Navigation Light function, the VLE System will adjust its intensity accordingly to illuminate only the Wind indicator on the top.
LS: New high sensitivity light sensor.
Sector 4: The optical system upgrade for the traditional bi-dimensional OPTOLAMP® lens, enables precise focusing.
OPTION: Amazônia 5 Aluminum: to replace previous Optolamp models. Simple installation without modifications (aluminum base).
RFI/EMI: absolutely FREE.
TDPS Pro System - safe signalization: even if there is a defect in the system, the safety of the boat will always be maintained (it TDPS System acts as a second lamp in the event of a system failure).
VLE and TDPS Pro Systems are an exclusive Optolamp characteristic.
Ultra Low Consumtion – UBC® - First Integrated LED Light in the market.
ABSOLUTE SAFE SIGNALIZATION: MAXIMUM LIGHT INTENSITY WITH DISCHARGED BATTERIES. DRAWS 18 TIMES LESS ENERGY.
Amazônia model Versions:
Amazônia 5 Plus "Classic" Version: 3 wires are needed for: Tricolor and Anchor Light or 4 wires to add Strobe Light function. Standard Installation with the original boat panel switches.
Amazônia 5 PLus "SW" Version: Only 2 wires for: Tricolor and Anchor Light; or 3 wires to add Strobe Light function. This version must use a mode selector: 3 positions switch ON-OFF-ON - You can use the Optolamp SW3 Accessory with wires and toggle protection (Not provided), or any 3 positions conventional switch: ON-OFF-ON..
Description:
Simple Installation: Base in Delrin block.
Waterproof IP 67 or IP68, connector (Optional Optolamp® Accessory: C3 or C4 -Not provided).
OPTION: Amazônia 5 Aluminum: to replace previous Optolamp models. Simple installation without modifications (aluminum base).
It can work up to 40 nights with a 12V/75A battery without recharge it.
Consumes 18 times less energy.
Show the Top Wind Indicator.
Total resistance against mechanic stress.
Warranty HE: 3 years.
Patented.
Specifications:
Weight: 225 gr
Height: 125 mm.
Diameter: 60 mm.
Base: Delrin block, very fast installation.
Power source: 10,6V to 14,4V.
Option 24V: V1830 Optolamp Converter -Not provided.
Consumption UBC®: 0,126A to 0,155A.
Horizontal range: minimum 2,2 NM.
In accordance with the COLREG Norms.
Vertical range VLE system: up to 4,3 NM.
Switches on-off automatically: at dawn at night and during storms or fog.
LED life: minimum 50000 hs.
Accessories:
-Optolamp® Box Switch S-310 -Not provided.
-Optolamp® SW3 Accessory: For Amazônia Mirim 5 > SW version -Not provided.
-Waterproof (IP 67), connector C4 Optolamp® Accessory -Not provided.
-New Electronic 24V Converter V1830 -Not provided.
OPTOLAMP® signalization products do not cause RFI-EMI interference on the boat equipment.
Optolamp and the Ecology:
Some materials used in different manufacture parts of our products are originally in the market, our ecological policy is to avoid greater consumption of raw material, energy and matrix tools.
ABSOLUTE SAFE SIGNALIZATION: MAXIMUM LIGHT INTENSITY WITH DISCHARGED BATTERY
OPTOLAMP New line
The assembly of the electronics is similar to that used in the Military and Aerospace area: it is absolutely reliable.
GLOBAL WARRANTY: 3 YEARS
Description:
Consumes 9 times less energy.
Ultra Low Consumption: It can work up to 40 nights with a 12V/75A battery without recharge it.
Total resistance against mechanic stress.
Easy installation.
Optional: black or white color body.
Warranty HE: 3 years.
Pat. Dep.
Specifications:
Weight: 283 gr.
Height: 135 mm.
Diameter: 60 mm.
Installation base: Anodized Aluminum (60mm x 80mm).
Power Source: 10,6V to 14,4V.
Option: 24V - V1830 Optolamp Converter -Not provided.
Consumption UBC®: 0,145A (145 mA).
Photo-sensor built-in.
Horizontal Range: 2,0 NM.
In accordance with COLREG 72
Switches on-off automatically: at dawn, at night and during storms or fog.
Light source: Electronic emission.
LED life: minimum 50000 hs.
OPTOLAMP® signalization products do not cause RFI-EMI interference on the boat equipment.
Optolamp and the Ecology:
Some materials used in different manufacture parts of our products are originally in the market, our ecological policy is to avoid greater consumption of raw material, energy and matrix tools.
Maximum light intensity with discharged batteries: absolute safe illumination.
Ultra Low Consumption - UBC®: it can work 62 nights with a 12V/75A battery without recharge it.
DESCRIPTION:
Safe illumination from 10,7V to 14,4V.
RF (Radio frequency) interference free.
The cabin always illuminated in navigation at night.
Keeps your cabin cool, cold–lamp.
Total resistance to mechanic stress.
Warranty HE: 2 years.
SPECIFICATIONS:
White or Black Aluminum.
Weight: 140 gr.
Height: 100 mm.
Power Source: 10,7V to 14,4V (24V Option).
Consumption UBC®: 0,100A (100mA).
Light Source: Electronic, Led: 280lm.
On-Off switch.
LED life: minimum 50000 hs.
(Without stock) Maximum light intensity with discharged batteries: absolute safe illumination.
Ultra Low Consumption - UBC®: it can work 62 nights with a 12V/75A battery without recharge it.
DESCRIPTION:
Safe illumination from 10,7V to 14,4V (option 24).
RF (Radio frequency) interference free.
None introduce RF noise in the VHF or SSB.
The cabin always illuminated in navigation at night.
Keeps your cabin cool, cold–lamp.
Total resistance to mechanic stress.
Warranty HE: 2 years.
SPECIFICATIONS:
Chrome Bronze
Weight: 200 gr.
Height: 120 mm.
Power Source: 10,7V to 14,4V (option 24V).
Consumption UBC®: 0,100A (100mA).
Light Source: Electronic, Led: 240000mcd
On-Off switch.
LED life: minimum 50000 hs.
|
You can use PayPal to buy from Brazil |
Share
